Smok Tech - Replacement Atomizer for VCT X2  - .4 ohm

Smok Tech - Replacement Atomizer for VCT X2 - .4 ohm

  • $ 1.99
  • Save $ 1

Dual horizontal coil with 4 wicking holes
Resistance: 0.4 ohm

smok vct x2 coils features:

resistance: 0.4ohm suit 20~30w

sold individually

suited for smoktech vct tank

These replacement heads are intended for use with the new VCT X2 Sub Ohm Clearomizer by SmokTech. These coils will work with the VCT A1, but they will NOT work with the VCT Pro.
X2-core coils have a longer lifespan and offer great flavor and vapor production. They feature dual horizontal coils and use organic cotton.
Changing the coil head is easy: simply unscrew the base of your VCT clearomizer, unscrew the old coil and screw in a new one. To fill the VCT, remove the base, tilt at a slight angle and fill with 3.8 ml of e-liquid (be careful not to get any e-liquid down the center tube.) Screw the base back on and allow a few minutes for the e-liquid to saturate the coil. Please make sure to prime a new coil by dripping a few drops of e-liquid down the center of the coil to saturate the cotton. If the coil is not properly saturated, it may burn.
PLEASE NOTE: Please only use the sub ohm (0.4 ohm) X2-core coils with devices capable of handling sub ohm coils. If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use High Drain batteries in a device capable of putting out 20W or higher. NEVER use sub ohm coils on an eGo battery or a device unequipped to support sub ohm coils. It is for your safety!
To ensure that the X2-core heads are thoroughly saturated and do not burn, Smok recommends dripping a few drops of e-liquid into the center of the coil head before using, as well as setting the tank aside for a few moments after filling with e-liquid. Please take the time to read the included User Manual for a detailed description on the proper use of this unit.